| Yamaha |
| Street Bikes |
| Dirt Bikes |
| Honda |
| Dirt Bikes |
RIVA Performance Forums
RIVA Performance Forums
General PWC Topics
3 place trailers?|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
I need a trailer that will haul 2 gpr's and a superjet. Does anyone know where I can get one.
|
|||
|
I know Zieman can probably custom make a trailer for you but it will be expensive. Another thing you can do is research for a good 2 place that has a good GCW and modify the front to put some bunks to carry a standup. I am looking into doing that to mine or just getting another trailer or putting the standup in my bed. I have a bed rug for my dogs so I know the bottom will be protected.
|
||||
|
I have got a double trailer now but it does not have enuogh tongue to do that. I found a guy with a zieman trailer for sale but he is in oregon. And I cant find a dealer out here on the east coast. PWC must be much more popular out west.
|
||||
|
Can the stand up fit side ways on the front? Set the two rear back some for balance
|
||||
|
I've buld a couple of different trailers, one was to haul 4 of them , then made it enclosed except front and back, it was kinda cool other than to tight to get down the sides of the machines to clean. I have welded on a rack on the front of my 2 place, and if I could ever fiqure out how to post pics I will send photos.
My suggestion would be try and build something over the top, but that dosent enfringe on loading and unloading other crafts also not be a head banger, just my thoughts. 04gp13 02 seadoo gtxdi 99gp1200 wildest looking gp this side of the miss, went by by. |
||||
|
I built a small reciever on the back of my two place trailer,it really wasnt very hard to do,and has been very handy.Ive pulled a single with a Raider behind it cross country with no problems,even kicked it up to 90 coming off Flagstaff behind my Ranger to test the tracking-no problem.I dont think it would be too hard to pull 2 doubles even.Hope this helps.
|
||||
|
Thats simple. Get a double trailer and place a set of bunks on the front so it fits sideways and work on your center of gravity and your there. Thats what I do on my double to haul two couches and a standup. Mick #521 Region 5 Closed Course '04 1st place Am. Vets. 1200 Super Stock Champion '04 2nd place Novice 1200 Super Stock 97 WaveBlaster 2 95 Blaster 95 Superjet w/701 02 FZ1 05 Yamaha Zuma 70cc's 62 mph 86 RZ350 55" Dumas Scarab w/Zenoah Pro Mod. Two Stroke Blender Big Bore Carb and Tiny Tach Stihl 290 20" 20 ton log splitter 7550 KW Briggs & Stratton Generator |
||||
|
I found out today that my Shorelander trailer only has a weight rating of 1500lbs. I cant put anything else on that trailer because it has the torsion axles. Com-fab will build me a double that will haul 2100lbs and extend the tongue 3-4 feet and I will just add bunks in front of the winches. But that will take 3 weeks. Wow I did not think it would be this hard to find a trailer.
|
||||
|
Torsion axles??? I think my trailer has a rating of 1200 or so. GPR, Blaster 2 and a Square nose on front. But then again I went over my trailer with my own welder and added my touch to it just before I had it Galvanized. Good luck. Mick #521 Region 5 Closed Course '04 1st place Am. Vets. 1200 Super Stock Champion '04 2nd place Novice 1200 Super Stock 97 WaveBlaster 2 95 Blaster 95 Superjet w/701 02 FZ1 05 Yamaha Zuma 70cc's 62 mph 86 RZ350 55" Dumas Scarab w/Zenoah Pro Mod. Two Stroke Blender Big Bore Carb and Tiny Tach Stihl 290 20" 20 ton log splitter 7550 KW Briggs & Stratton Generator |
||||
|
Take a look at Shadowtrailers. They have a nice three place trailer.
http://www.shadowtrailers.com/pwc_trailers.htm I bought a two place trailer from them in 2002 and am still impressed with their construction. |
||||
|
Try finding a small pontoon boat trailer that's for sale.You can then move the runners to do whwhat you want. There is a guy here that has a setup like that.
99 XL1200ltd Tigershark |
||||
|
Torsion axles??? Yes instead of a solid axle the wheels are mounted to hubs that are attached to some big spring things. |
||||
|
Do you know if they have any dealers on the east coast? They have the trailer I want but it would be to much to ship. |
||||
|
When I purchased my two place trailer from them in 2002 I contacted them directly and had it shipped to Texas from California.
I believe I paid $500 to have it shipped. I will look for the invoice and let you know the exact cost. One of the many things I liked about dealing with this manufacture directly was that I was able to customize the trailer with anything I wanted. They were an excellent group to work with from my initial order to handling shipping for me. If you are interested in their trailers they will probably give you a quote for the trailer and shipping over the phone. |
||||
|
ive also mounted a reciever hitch to the rear of my 2 place trailer, ive got my stand up on a single trailer that i pull behind my 2 place trailer, works fantasic.
|
||||
|
My Shorelandr has broken (cracked) twice. Now I'm looking for a new compact double for two GPR's. Any ideas?
1-05 GPR 72 mph 1-06 RXP 70 mph |
||||
|
My next step is to get com-fab trailers to make me a heavy duty solid axle trailer and either add 3 ft on the tongue or wait until the end of the season to get a custom made trailer for all three.
|
||||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|
RIVA Performance Forums
RIVA Performance Forums
General PWC Topics
3 place trailers?