Has anyone built one of these themselves? I was looking for some ideas and dimensions so I know how much steel to buy.

Here are some ideas from Ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2455843254&category=26455

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2456055457&category=26455

mark c
http://www.hydrotoys.com
02 GP1200R
96 XP
01 FZ-1
00 Sportsman 500
02 Bombbardier DS650 Baja
04 SXR 800

here is one made from pvc. al you would have to do is add casters to the bottom of it



http://www.stickerpimp.com/graphics/pwc/beachstand/index.htm

quote:

---

Originally posted by GPRsmartarse:
Has anyone built one of these themselves? I was looking for some ideas and dimensions so I know how much steel to buy.

---

Make them out of aluminum, I have made one for my Blaster 2 and one for my GPR. The one I made for the gpr has two bases. One for the garage and has castors and the other for the beach. Made with pins for easy takedown.
Steel is so heavy.
Mick

#521 Region 5
01 GP1200R
97 WaveBlaster 2
04 Yamaha Zuma "Pit Bike"
86 RZ350
55" Dumas Scarab w/Zenoah Pro Mod.
Two Stroke Blender, Dual Pipes, Big Bore Carb and Tiny Tach.

I have built a few out of .065 1"x3" tubing and I am working on one as we speek just fired up the welder. I have 20bucks in a stick of 1by3 20feet long then the casters, the ones I'm useing now are going on a stand for a show so I'm useing one with brakes. You can get them from 20 bucks and up for all 4.

I have and usually get away with 1 stick of 1inch by 3inch 065 20ft long, unless I do something else to the stand that requires different size material. Can send photo's just give me your e-mail address.

quote:

---

Originally posted by GPRsmartarse:
Has anyone built one of these themselves? I was looking for some ideas and dimensions so I know how much steel to buy.

---