I recently had the little filters removed since I kept getting oil coming out from the oil catch can. Yes I dropped the oil level to 1/4 of a tank. I put it back in the shop and they routed the hose from the oil catch can back into the air intake and the block off plates were added. Now I get an engine miss between 2-3,000 rpm's. It feel like the engine want to cut off when it idle. So Riva or anyone please help. I am having so many problem with this Stage 1 Kit when everything should be tested before it is shipped to the consumer. The only parts worth the money is the Ride plate (known as the bat plate) for the rest I am sad to say don't waste the money. I haven't tested the intake gate not available yet.

Your fustration is common. The Riva parts are not causing the issue. Proper ventalation of the motor is the issue.

Try to do some reading here and you will find that running 4 quarts is better then running 1/4 a tank. :/<:

Get comfy cause this site goes on for ever. it seems to never end. http://www.floridasmarthomes.com/teammoto/?cat=1