Inland Jet sells a 2 degree pump wedge for The STX-F's will this increase my top end at all?

try the 1 degree if you must try either, I tried the 2 degree and it screwed up my steering and its smoothness....
I tossed the POS and now run without the wedge.
PS, if you do go with the 2 degree, mount your steering cable on the bottom of the exit nozzle, not the top, since it will no longer be level if attached to the top.

were can i find a 1 degree pump wegde

try inland jet if they are still in Biz.

thay only got a 2 degree

then forget about it, the 2 degree was terrible, pure garbage.

^^
I dont know what this guy is talking about but i installed The R&D ride plate and 2 degree pump wedge to trim the nozzle up and I've gained a good share of top end. Didn't ruin my steering or anything like that. Although it does porpise with three people on it but i always ride solo. i have no top end figures all i can tell you is that my friend has a bone stock 1200 stx-r and when my 15f was stock he would beat me. Now at top end i pull on him.

I just purchased a 2 degree pump wedge yesterday from inlet jet and it should arrive fedex today. I'm putting it on my stxr and will report my results.

06 gp1300r
02 stxr 1200

PS. I called group K yesterday and they had a few left for half the price (50.00), but the salesmen didn't know if they were 1 or 2 degrees and I didn't want to take a chance.

Hi,

For the money (even thought that small piece of aluminium shim plate prob. costs about 20 bucks to make) it was well worth it. It added a solid 2 mph (if not more)to the top-end and lifted the bow so it doesn't nose-hunt as much. Basically, it just trimmed the boat up a bit and offered less drag.

Even though it certainly lifted the bow like I wanted, I'm more of a rec rider and love to double jump wakes, so I'm also going to get the R&D Rec plate. That combo should do what I want...
(The downside is I'm sure it will end-up porposing if/when I add a passenger though... .)

thanks for everyones help I will buy one and let you know the results

After installing the pump wedge.Did anyone get a vibration or like a shudder right before the boat plains out, This is happening to my 15f, It dosen't do it right out of the hole, It's right before it plains out and only for a couple of seconds.Any idears?