Is it possible to install the 1300's EFI system on a 1200R?

KM

It would take a lot of parts,elec.,plus.

I bet there are is a 1300 owner that has stripped all those parts off to build a no holes barred race boat - maybe you can find one of those people and buy the parts needed used

I have some of the parts you need. You can e_mail me at custommotorsportsny@yahoo.com
If you e-mail me your number I will call you tommorow. Thanks

I was thinking of doing this conversion. Has anybody here been able to do this?

I'm doing it right now. You have to have the whole system, flywheel, stator cover, intake, exhaust and all the sensors. Oh and the gas tank with the pump in it. Also you will have to plug the pulse lines in the block.

Would be a nice project. But like you said, if you have all the parts. The reed valves also get removed right?

Here is the complete list of things you need to swap
stator cover
flywheel
intake manifold / throttle body rack
ALL wiring
CDI and black electrics box
all the sensors
oil tank sender
gas tank and electric fuel pump

yes you will have to plug the pulse line fittings in the cases

no the reeds and the exhaust don't have to be swapped

Billies done one before. ( RX951)