I just installed a Coffman exhaust in my 701 raider but I can't seem to find where the water by-pass connects to.According the diagram that was sent with the exhaust states that there are two different fittings on the head but mine only has one. One is at the back of the head that is 3/8 and the one at the front is a very small tube that sticks out of the head. any help please!!!! I have a 61x motor if that helps

hi
in the back of the head there is a plug.
in you coffman kit there is a fitting.
you are supposed to replace the plug with the fitting and that will be your second line. if your kit didnt come with the fitting buy a flush kit and it comes with the fitting.

I have a 97 model. If this pipe is for a 62t motor will it still work on mine. I have already installed everything except the by-pass. The original setup was a hose coming off the exhaust to the top of the motor with a tee in between the two and the tee had the bypass.