Go
New
Find
Notify
Tools
Reply
  
  Login/Join 
Posted
Hello All,
Here's the problem. When cold I can prime and start (turns over fine), she runs, but when shut off she won't fire back up for a while. If she tries to fire but doesn't start I have to wait again til she decides to fire and run. Once running everything seems fine. I thought it may be a fuel pressure problem since I wasn't getting any relief from the gas cap, so I pressured up the tank and it was fine. Checked plugs, spark, adjusted on lows, and tried priming with no luck. Any ideas??????
__________________
'98 GP1200 w/ Riva Pump Gas Porting, 84.5 Pro-X, Riva Head w/41cc Domes, R&D F/A, PreMix, Primer Kit, Removed Choke Plates, V-Force D 2's, Tru/Welded Crank, LW Flywheel, Water Bypass w/ PJS Valve, Smoothed out pump w/ Box Stock XO, Riva plate , Aquavein Grate, 0* nozzle, Riva Sponsons, Trued Hull, UMI Steering


'98 GP1200 Riva pump gas porting, matched cases & intake, Riva head w/ 41cc domes, R&D F/A, Choke plates removed/Primer kit, 135 mains 110 lows 2.0 n/s 26 pop off, V-Force D-2's w/spacer, LW flywheel, water bypass w/ PJS valve, smoothed out pump w/ box stock XO, Aquavein grate, Riva ride plate, (Riva Blue CDI not installed yet)
 
Posts: 6 | Registered: June 27, 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
I found the problem, it was the Riva Blue CDI. I put the stock CDI in and she cranks and runs fine. Anyone know if the Riva CDI's are repairable?


'98 GP1200 Riva pump gas porting, matched cases & intake, Riva head w/ 41cc domes, R&D F/A, Choke plates removed/Primer kit, 135 mains 110 lows 2.0 n/s 26 pop off, V-Force D-2's w/spacer, LW flywheel, water bypass w/ PJS valve, smoothed out pump w/ box stock XO, Aquavein grate, Riva ride plate, (Riva Blue CDI not installed yet)
 
Posts: 6 | Registered: June 27, 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 


© 2007 RIVA Motorsports