Reluctantly Ive about givin up on trying to get my stage 2 ready to take with me to WF's.I thought I would throw its advent in my wifes machine for a little boost.My question is-the settings recommended by advent show all switches for CURVE & POWER VALVE in the off position.Has any body tried any other settings?The snap was set by riva @ 60 for my stinger pipe ,which is a tripple pipe setting so I thought there might be a better than recommended setting for the stock pipe.My wifes ski has untouched stock carbs,D-plate,38cc head w\full stock gasket,6.5 set-back.With sponsons stepped and is running 67.5 @ 7040.It pulls real good all the way up,looking for a little more on top.Thanks in advance

Send me the advent Ill take it from there

Steve we need to talk next week about protec and world finals.

no send it to me...

try the stinger curve, snap 60, cat and water sensors off

on my advent CDI that was
off
on
on
off
off
off

in your serial number on the label is a curve set.. D60 if it's riva box. You can look up the curves in that set if they aren't listed on the box.

Insane,Ill call mon or tues.Philip,tried the settings off\on Off\on think it was snap 58.Ill try 60 tomorrow thanks.Very little gain over pro-tec CDI. 3\4 tank of fuel,stepped sponsons still 67.5 @ 7020-7030 before heat soak.Tried unstepping sponsons,thicker washers under front of tabs.Water got worse,porpoised badly and lost 1 mph.Will try thinner and same amount of washers under tabs tomorrow with snap 60-Hitting a wall @ 67.5 It is fun seeing 84 on the dream-o-meter,maybe I should hurry & sell this ski on E-Bay Thanks All

No difference Steve? Find a trim cable yet?