I'm putting the Riva T Handles in the carbs. I got the tamper caps out thanks to the great pics by Fercho.

Should I put oil or grease on the o-rings or just leave them dry?

In case anyone is keeping score, here are what the stock settings were.

ls 1 3/8 1 3/8 1 5/8
hs 1 1/2 1 1/8 1 5/8

[ 08-07-2002: Message edited by: britam ]

If they stop when installing don't go any further.I got a bad set from Riva i'm sending them back