I did a search for them and couldn't find any. I did an install on my VXR a long time ago but wanted to see if anyone had anything recent. Plan on doing the install next week sometime.

Thanks,

Bill

Disconnect steering cable, trim cable, waterspout hose, and bilge hose. Then remove four 10mm bolts and one 6mm bolt(left side) that hold the pump to the transom plate. Pry pump off with a screwdriver and it'll come out, drive shaft and all. You'll need the impeller tool(should've come with it) and a drive shaft holder. Impeller has reverse threads. I can e-mail you the pages from the service manual if you need them. It's pretty easy. For maximum gains, follow Fercho's instructions.

Oh yeah, take the ride plate off first, after removing speedometer sensor.

Sounds good seems pretty straight forward. I got plenty of 5200 to complete sealing things up.

Thanks,

Bill

get some acetone as well to help clean up the excess 5200

and on the WPPracing web site, tech info, is an idea for removing stuck impellers, in case you need it