there probably is no rating, they r so small, but should i make them all the same? maybe 2 or 3 inch pounds?

If you are refering to the allen screw you would use for waveeaters clips or the original i believe the manual says something like 2.6 ft/lbs which is very little...... and the cover screws were like 7 something. Blue Loctite on the allen screws and loctite 572 (Thread Sealer.. White stuff) on the cover bolts all per the service manual.

can i use red loctite on the clip screws instead of blue?

my manual shows those clip fasteners at 2.2 lbs with LT242.

The cover fasteners are 7.2 lbs with LT572

Yes, some of us are using red loctite on the clip screws for safety.

yeah but i dont want the red loctite to hold it so tight that i break the screw wen i'm taking it out.

and how many hours do u guys run ur PV's before u clean them again?