What past or present Yamaha watercraft measured 105"X44"X24"(LxWxH). I am trying to find a watercraft cover with the vacu hold ducts to go on my Mastercraft WetJet Kraze w/ a 701-61x.I put some Riva race handle bars on it so the hieght at the bars is only 24" or so. Has any body got any used parts for a 701-61x ? I have one 48mm mukuni w/out choke blade.I was thinking about maybe going with two 38mm or 44mm carbs and manifold. What did the the 701 waveraider have for carb setup and how much HP? I am also looking for a aftermarket performance head w/ exau.pipe mounts.

Even if you found one with the same dimensions (which I don't think there are any), you'd have to be extremely lucky for that cover to fit. The handblebars would have to be in the same location and the shape would need to be similar.

TexDen,
I have something you might be interested. It is an engine analyzer made just for the Wetjet. I bought thinking it would work with my old Yamaha VXRPro because it had the same engine. I soon found out that Wetjet put a special connector in there ski that this plugs into. It does not have any instructions but seems simple enough. It turns on and seems to function fine. The picture basically says it all. It looks like it gives RPM'S, tests the charging circuit, checks the CDI, and tests the ignition circuit. I have no use for this but you might. Let me know if you are interested in it.
Follow this link:

http://www.pwctoday.com/viewtopic.php?p=127132#127132