How do you tighten up the throttle cable, when you squeeze my 1300R's throttle lever it is real loose, while my 1200R is nice and stiff how do i tightnen is up to make it alittle stiffer and eliminate the play? i tried messen with the screw on end of lever but did nothing?

Right where it hooks to the carbs there is a 10mm nut you can adjust to tighten it right up. If you have any problems let me know.

Will

Is it the same on the 1300 since it doesnt have carbs, i havent had a chance to look at it yet but ill look for the nut tomorrow. thanx alot man!

As long as you fully open the throttle when fully pulled back do not worry about it. If you tension it you will end up 3/4 distance travel at wot and will eventually snap the throttle cable. We tend to hang on tight when riding at WOT and put a lot of stress on the cable