| Yamaha |
| Street Bikes |
| Dirt Bikes |
| Honda |
| Dirt Bikes |
RIVA Performance Forums
RIVA Performance Forums
Sea•Doo PWC Performance Forum
Great White RXP project|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
After having good results with Frank's(peteshaulings) rxp, my friend Jacob decided to take the plunge and order the Stage 3 kit for himself. This is the start of our next project. Another modified stage 3 RXP
Keep in mind we just started on this and progress will be updated as we go. We took the yellow RXP and decided to give it a paint job. Great White Shark basically. We are still in the process of working on the paintwork and changing the parts out. So these are previews of what is in store. We plan on changing the rear bar to black, remove the seadoo sickers on the hull and the yellow trim has to go also. Install custom Hydroturf blue mat's that don't cover up too much of the sharks body in the footwells. The Great White shark painting came out awesome so far. It looks 100% better in person and the teeth sparkle in the sunlight. We still need to do the registration numbers, but I had to post some pictures. Here are a few pictures: I know they aren't the best, but we just got done tonight and I took a few quick pics. Edited(photo shop) view with no yellow UPDATED PICTURES... SEE POST BELOW FOR NEW PICTURES. Took all the yellow off today. What a difference. side view of Great White shark front view side view of body of shark going into footwells Front view closeup of Great White side view of blue paint basically front side view of bow Back view of tail and footwell area another side view front side/closeup another front closeup Back view side view again picture of tail/back of rxp This message has been edited. Last edited by: Enufpwr, SKIWORX PERFORMANCE WATERCRAFT 2000 Ultra 150 FFP Triples and CDI, Novi XR 48's, Full Race porting, Raised Port, Skiworx custom billet race heads 170psi compression, Shredmaster(filled holes and pump shoe), UMI Steering, Aggressor Sponsons,16/20 Solas, Worx intake 2002 Ultra 150 FFP Triples and CDI, Novi XR 48's Stock compression, Pump gas 94 octane, Shredmaster(filled holes and pump shoe), UMI Steering Aggressor Sponsons, 16/20 Solas, Worx intake |
|||
|
Beautiful!
|
||||
|
Very Very Nice!!!
"Sweet Home Alabama" |
||||
|
Gorgeous paint job!
Can't wait to see the innards when you're done. |
||||
|
Very nice paint job. Love the blue.
|
||||
|
Thanks for the nice comments.
In the sun the paint has a sparkle or glitter to the ski. My friend Jacob wanted something different and I think this stands out. . We actually ordered a black grab handle and black rub rails today. Thanks to HydroToys for the info. I got that off his website. Rear Handle 269000812 from a RX-DI model Rear Rail Insert 291001521 from a GTI model 2-Side Rail Inserts 291001520 from a GTI model I took some more pictures today with the handle removed, the rails removed, and no yellow seadoo stickers on the jet ski. We test fitted the hydroturf mats and about to install the splashguard later this week. I'm actually taking a break from working on these seadoo's.. and finally going to finish up my ultra hopefully this week. Here are some more pictures updated images no yellow front view underseat view from side Side view without yellow anything Front top view Front Closeup pics Top sideview from above Back view with hydroturf mats test fitted Another top view form the side rear view of mats back sideview not the best SKIWORX PERFORMANCE WATERCRAFT 2000 Ultra 150 FFP Triples and CDI, Novi XR 48's, Full Race porting, Raised Port, Skiworx custom billet race heads 170psi compression, Shredmaster(filled holes and pump shoe), UMI Steering, Aggressor Sponsons,16/20 Solas, Worx intake 2002 Ultra 150 FFP Triples and CDI, Novi XR 48's Stock compression, Pump gas 94 octane, Shredmaster(filled holes and pump shoe), UMI Steering Aggressor Sponsons, 16/20 Solas, Worx intake |
||||
|
That is one of the most Kick ASS paint jobs that I have ever seen on a PWC!!!
What did the paint job cost? Just Friggin sweet!!! I want one done on my RXT once I buy it! I am jealous!! |
||||
|
Good Lord!
That thing is just right out mean and nasty looking! My compliments to the chef!!! Mark http://www.hydrotoys.com 2000 GP1500R 4tecSC S3 2002 GP1500R CF 4tecSC Turbo 2004 Polaris MSX 4tecSC S3 2002 Octane |
||||
|
A friend did the paintwork. So we owe him a few favors in the future and a case of beer for starters. Took him 1 week. I couldn't put a money figure down,but he said he would estimate around $1000 if he would do that for someone else. |
||||
|
and worth every penny in my opinion!! |
||||
|
|
||||
|
that's pretty bad arse man. I like it! at first I thought it was just a black and that was just the reflection in the sparkling clean paint but then I read the post. that's totttally sweet man!
'96 WaveVenture 1100 stock |
||||
|
THAT IS A SICK PAINT JOB!!!!!!!!!!!!!!!!!!!!
What are your plans for the engine? '03 GP1300R Custom Stage II. -78.3 MPH @ 7270 RPMs -Stock Heads Modded by Mandy's Performance -1300 Cylinders, Cases, and Pistons Modded by Mandy's Performance -RIVA Pro-Series E.F.I. Control Unit -RIVA Cat Temp Sensor Chip -RIVA GPR Free Flow Exhaust Kit -RIVA GP1300R RACE Flame Arrestors -IR/V-Force Moto Speed Reeds -Riva D-Plate -IR/Jetworks Mod -R&D Billet Exhaust Power Valves -WaveEater Couplers -Air Holes In Hood and Storage Bucket -Solas Concord SB Impeller 14/20 repitched to 14.5/23.5 by Mandy's Performance -RIVA GPR Pump Seal Kit -OEM Pump Blueprinted by IR -OEM 87mm GP1200R Reduction Nozle -R&D Hydro Force Steering Nozzle cut to 20mm -R&D 800 Grate Modded by Mandy's Performance -R&D Rideplate w/ IR Mod 2 -R&D GPR Performance Trim Tabs Sanded Smooth on Bottom -Stock Stepped Sponsons -Hydro-Turf Mats -Jettrim Seat Cover -Garmin Foretrex 201 GPS -PET-2500 RPM Guage '03 1200XLT Riva Stage II. -Per Riva Specs w/ CDI -Mandy's Performace Carb Mod -WaveEater Clips and Couplers -Jetworks Mod on Stinger 3 Pipe -Modded Riva Rideplate by Mandy's Performance -Modded Scoop grate by Mandy's Performance -Hydro-Turf Mats -Jettrim Seat Cover |
||||
|
Thanks everyone... and the plans for the engine are to build a Stage 3 like Franks(peteshauling) on here.
|
||||
|
enufpwer,
I rode with U guys the last half of last summer My rxp is yellow was stock last year.In the prosse of adding the stage 1 kit today.Do you think some paint work could be don to mine,Hopufully at a good price.Also I want to mod my water box and need to know who U guys took franks to?email me at krazyk@wowway.com |
||||
|
Krazy_K, where do you launch?
Frank Stage 3 RXP Soon to be 300 ponies |
||||
|
Metro beach. teal dokata yellow rxp.
|
||||
|
Frank Stage 3 RXP Soon to be 300 ponies |
||||
|
Another nice paint job.
|
||||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |