Got my new Rxt friday afternoon took it out for first time yesterday.Stopped for a break after about an hour of riding and when I plugged the lanyard in I got a continuous beep followed by 4 beeps. It finally started after unpluging the third time. Did the same thing when I went to load it.I know there is a way to bring up those codes but couldn't remember how Hulk or anyone help me out here.

I bought it at Longview Cycle and Ski for $10,000 plus TT&l. Best price of 4 dealers I checked. Didn't ask the price of RXP I can if anyone is in market for one.

You don't have a code to look up, all you had was a bad connection on the layard (1 long beep followed by 4 beeps) Your battery is probably not up to full charge. Normal on a new ski.
If it does it again, remove the layard for a minimum of 30 seconds and try again. It takes about 10 seconds after the layard is removed for the ski to actually power down

If you had a fault, you press SET 5 times and you will get codes followed by END

Thanks sunfunzoom I thought that was how to bring up the codes I guess that explains why I didn't get a code when I did that.
I put 2.6 hrs on it yesterday punched it for a 10 second WOT with one bar of fuel left it hit the 70 mark on the speedometer I didn't have my Gps Mounted on it yet. Was going back out today and check on GPS but it rained all day.Hope to get Stage 2 kit on by Memorial Day.Waiting on the intercooler and exhaust kit.