|
||||||
|
|
||||||
|
| Yamaha |
| Street Bikes |
| Dirt Bikes |
| Honda |
| Dirt Bikes |
RIVA Performance Forums RIVA Performance Forums Sea•Doo PWC Performance Forum Green Hulk 77+ MPH Videos|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
I was out in radar canal again this afternoon with my camera setup.
This first video came out pretty good. The ski was porpoising like hell though and my camera mount was just flapping in the breeze. At one point i had to drive with one hand and steady the camera with the other. I'm impressed with how quick it snaps to 75 This run was with 3/4 tank of fuel. "right click" "save as" http://www.greenhulk.net/77.0.mpg I gave up on the camera mount for this second run and not having to worry about steadying the camera I was able to pull a 77.2. If I could ever get this porpoising under control im confident I can hit 78. "right click" "save as" http://www.greenhulk.net/77.2.mpg Temperature was 90 degrees at the time of these runs. This message has been edited. Last edited by: Green_Hulk, |
|||
|
You need to feed that rabbit some lettuce Jerry.
 Just kidding...great numbers for an RXP. I guess that sanding worked well for you. '01 1300 BB w/ triples, Special K porting, PistonWash tuning...85.2 mph. |
||||
|
Wait till the first cold front. Your gonna be flyin !!
great numbers 
|
||||
|
bounce bounce bounce!!
i need to find a way to fix that! |
||||
|
Awesome Jerry! Don't listen to Princess (Fercho told me I have to call him that now), the GPR guys are just getting nervous as your GPS continues to climb
 I'm saying Jerry is 80+ by MB2, woohoo! |
||||
|
bounce bounce bounce!!
i need to find a way to fix that! Trade it in for a RXT 05 RXT Riva intake grate Riva 2.0 pump wedge Riva opas blockups |
||||
|
Hulk-
Hulls mods maybe? |
||||
|
There is no doubt about it that it will take hull/rideplate mods to stop the porpoising. I'm working on it!
|
||||
|
Congrats bro, this are very good numbers, what new mods you did to the ski to reach this speed in 90 deg air?? i read that your ski was doing only 74 ish just a few weeks back, thanks Ray
|
||||
|
Thanks Ray!
I found the speed in the rideplate. I filled the holes and trued my new Riva grate to the ride plate. (it hung down about 1/8 inch) Here are pics of what i did. Your RXT could benefit too. http://www.greenhulk.net/forum/viewtopic.php?t=660 |
||||
|
what did you fill the bolt holes with?
'03 GP1300R Custom Stage II. -78.3 MPH @ 7270 RPMs -Stock Heads Modded by Mandy's Performance -1300 Cylinders, Cases, and Pistons Modded by Mandy's Performance -RIVA Pro-Series E.F.I. Control Unit -RIVA Cat Temp Sensor Chip -RIVA GPR Free Flow Exhaust Kit -RIVA GP1300R RACE Flame Arrestors -IR/V-Force Moto Speed Reeds -Riva D-Plate -IR/Jetworks Mod -R&D Billet Exhaust Power Valves -WaveEater Couplers -Air Holes In Hood and Storage Bucket -Solas Concord SB Impeller 14/20 repitched to 14.5/23.5 by Mandy's Performance -RIVA GPR Pump Seal Kit -OEM Pump Blueprinted by IR -OEM 87mm GP1200R Reduction Nozle -R&D Hydro Force Steering Nozzle cut to 20mm -R&D 800 Grate Modded by Mandy's Performance -R&D Rideplate w/ IR Mod 2 -R&D GPR Performance Trim Tabs Sanded Smooth on Bottom -Stock Stepped Sponsons -Hydro-Turf Mats -Jettrim Seat Cover -Garmin Foretrex 201 GPS -PET-2500 RPM Guage '03 1200XLT Riva Stage II. -Per Riva Specs w/ CDI -Mandy's Performace Carb Mod -WaveEater Clips and Couplers -Jetworks Mod on Stinger 3 Pipe -Modded Riva Rideplate by Mandy's Performance -Modded Scoop grate by Mandy's Performance -Hydro-Turf Mats -Jettrim Seat Cover |
||||
|
Thanks for the tip Jerry, i would take a close look to my Riva intake grate tommorow, now is NBA time bro
|
||||
|
He did the job using the "right stuff" silicone. |
||||
|
The bolt holes on the grate were filled in with Right Stuff, but i filled the ride plate bolts with Bondo-Glass, but had one pop out so i filled it with JB Weld stick.
|
||||
|
Error downloading codec. Any ideas?
Mark http://www.hydrotoys.com 2000 GP1500R 4tecSC S3 2002 GP1500R CF 4tecSC Turbo 2004 Polaris MSX 4tecSC S3 2002 Octane |
||||
|
Mark, i have no idea. Several other people reported the same problem. Wish i knew how to fix it.
|
||||
|
It's because they are in Mp2 format which the standard media player does not decode. The only way to view them is to pay for the decoder from a site.
Regards, Mike 2005 GP1300R Riva Power Filter Reed Stuffers Riva Ride Plate Riva Top-Loader Grate PPK Riva EFI controller Solas Dynafly 14/20 Riva 60T head kit 145 PSI Riva Head Girdle Kit Riva Pro series Spons/using stock stepped currently however. Riva Trim Tabs Pet 2100DX tach Free Flow Kit D Plate Jet Trim Seat 95 Blaster Factory Full Mod pipe Riva pro series girdled head at 180 PSI. Solas 13/17 impeller Dry cell Battery Dual cooling for pipe Primer and K&N filter |
||||
|
Well that sux!
Mark http://www.hydrotoys.com 2000 GP1500R 4tecSC S3 2002 GP1500R CF 4tecSC Turbo 2004 Polaris MSX 4tecSC S3 2002 Octane |
||||
|
if someone could tell me how to save this video i will repost it. I'm still learning all this video stuff
|
||||
|
Simple just recompile it into a mpeg 1 video and we can watch it using the meadia player 10.
Cheers, Mike 2005 GP1300R Riva Power Filter Reed Stuffers Riva Ride Plate Riva Top-Loader Grate PPK Riva EFI controller Solas Dynafly 14/20 Riva 60T head kit 145 PSI Riva Head Girdle Kit Riva Pro series Spons/using stock stepped currently however. Riva Trim Tabs Pet 2100DX tach Free Flow Kit D Plate Jet Trim Seat 95 Blaster Factory Full Mod pipe Riva pro series girdled head at 180 PSI. Solas 13/17 impeller Dry cell Battery Dual cooling for pipe Primer and K&N filter |
||||
|
| Previous Topic | Next Topic | powered by eve community | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
|||
| Site | RIVA Performance Forums | ||
| Servlet | eve2da013 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Sea Doo Performance New" | ||
| Wordlet Set | |||
