Hi all, looking for some help. I have two RXT's and having an issue with one of them. Before putting them away for the winter I had the first service done, batteries pulled etc. A couple of weeks ago I pulled them out of storage, installed the charged batteries and dropped them in the water. Both started up right away and after a 5 minute ride to the house they were both put on lifts. Couple of weeks later I tightened down the battery bolts and hopped on to go for a ride. One of them fired up right away but the other wouldn't turn over. I pulled off the seat to see what was going on. You'll have to forgive me for my not being very mechanical with this explanation but here is what I observed. When I pressed the start button I could hear what sounded like a solenoid activating and then maybe some sort of vacuum but the engine never turned over. This weekend I decided to swap the batteries to see if that was the issues. When I removed the battery from the one I wouldn't start I noticed that I had pinched the end of a hose that leads from somewhere in the front of the sled. I swapped out the batteries but nothing changed. Still hear a solenoid fire when I hit the start button but it won't turnover. I figured I would ask you guys before pulling it out of the water and heading back to the dealership. Thanks in advance and sorry for the long and not so technical message.